The wires exit the axle through a hole drilled in the side of the cabinet, travel through a routered groove downward until they are beyond the radius of the rotating drum, then the wires go back into the cabinet. The unsightly groove full of wires was then covered with paper (so the wires wouldn’t stick to the tape), then wide masking tape, then the formica laminate was laid on the cabinet sides which hide the wire-groove entirely. I realize I’m screwed if I need to replace one of the wires, but they still pull back and forth, so I could thread a new wire in by pulling an old one out if I had to.
MILLERCADE (almost done!) with rotating control panel set to Joysticks.

Showing posts with label Wire Slot. Show all posts
Showing posts with label Wire Slot. Show all posts
Sunday, August 24, 2008
Wire Slot
The wires exit the axle through a hole drilled in the side of the cabinet, travel through a routered groove downward until they are beyond the radius of the rotating drum, then the wires go back into the cabinet. The unsightly groove full of wires was then covered with paper (so the wires wouldn’t stick to the tape), then wide masking tape, then the formica laminate was laid on the cabinet sides which hide the wire-groove entirely. I realize I’m screwed if I need to replace one of the wires, but they still pull back and forth, so I could thread a new wire in by pulling an old one out if I had to.
Labels:
Wire Slot
Subscribe to:
Posts (Atom)